Domestic Market
Introduction
SUPERON PHOS. COPPER 3 is an economical phosphorus–copper brazing alloy containing 93.8% copper and 6.2% phosphorus, with an operating temperature of 730°C. Equivalent to BACuP-1, CP203, CP6, BCuP-1, and L-CuP6, it is similar to Silver 2 but with lower silver content, making it a cost-effective choice. This alloy is primarily used for copper-to-copper brazing in refrigeration, air conditioning, and sanitary applications where wide joint clearances, good strength, and affordability are important.
Applications
The most budget-friendly option, ideal for wider joint clearances, with a sluggish flow rate.
General Information
| Ag | Cu | P | Others |
|---|---|---|---|
| - | 93.8 | 6.2 | - |
Additional Information
Physical And Mechanical Properties
| Melting Range | 710-924 |
| Density | 8.1 |
| Tensile Strength | 250 |
Standard Sizes and Diameters
| Diameters: | 0.50 mm to 4.00 mm in form of Wire and Rod |
|---|---|
| Size & Weight: | Any other size and weight as per customer requirement |
International Standards
| BACuP-1 , CP203 , CP6 , BCuP-1 , L-CuP6 |